Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX215G2T04 for cylindrical shafts with a wide inner ring protruding in both directions. Contact seal with additional protective plate (oil deflector) on both sides. Fastening to the shaft: eccentric locking ring with M10x1.25 screw.

Rated dynamic load 66 kN, calculated static load 49.5 kN. Use temperature -40°C to 100°C
Suitable for use in low temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX215G2T04 housing bearing to be installed in both the European series housing (ISO) and the Asian series housing ( JIS).
Eccentric snap ring width (B2): 23.9 mm.
Inner ring/inner race width (B): 74.6 mm.
Total bearing width including eccentric snap ring rings (B1): 92.1 mm.