|
Quantity
|
Out of stock
|
||
|
|
|||
Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX211-34G2 for cylindrical shafts with a wide inner ring protruding in both directions. Contact seal with additional protective plate (oil deflector) on both sides. Fastening to the shaft: eccentric locking ring with 3/8-24UNF screw.
Rated dynamic load 43.55 kN, calculated static load 29.2 kN. Use temperature -20°C to 100°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX211-34G2 housing bearing to be installed in both a European series (ISO) housing and an Asian series housing series (JIS).
Eccentric snap ring width (B2): 20.7 mm.
Inner ring/inner race width (B): 55.4 mm.
Overall bearing width including eccentric locking ring (B1): 71.3 mm.

