Single row sealed high temperature insert ball bearing with spherical outer ring surface SNR EX210G2T20 for cylindrical shafts with a wide inner ring extending to both sides. Labyrinth contact seal on both sides. Fastening to the shaft: eccentric locking ring with M8x1 screw.

Rated dynamic load 35.1 kN, calculated static load 23.2 kN. Use temperature -20°C to 200°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX210G2T20 housing bearing to be installed in both the European series housing (ISO) and the Asian series housing ( JIS).
Eccentric snap ring width (B2): 18.3 mm.
Inner ring/inner race width (B): 49.2 mm.
Total bearing width including eccentric snap ring rings (B1): 62.7 mm.