Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX209G2 for cylindrical shafts with a wide inner ring protruding in both directions. Contact seal with additional protective plate (oil deflector) on both sides. Fastening to the shaft: eccentric locking ring with M8x1 screw.

Rated dynamic load 31.85 kN, calculated static load 20.8 kN. Use temperature -20°C to 100°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX209G2 housing bearing to be installed in both a European series housing (ISO) and an Asian series housing ( JIS).
Eccentric snap ring width (B2): 18.3 mm.
Inner ring/inner race width (B): 42.8 mm.
Total bearing width including eccentric snap ring rings (B1): 56.3 mm.