Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX203-11G2 for cylindrical shafts with a wide inner ring protruding in both directions. Contact seal with additional protective plate (oil deflector) on both sides. Fastening to the shaft: eccentric locking ring with 1/4-28UNF screw.

Rated dynamic load 12.8 kN, calculated static load 6.65 kN. Use temperature -20°C to 100°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX203-11G2 housing bearing to be installed in both a European series (ISO) housing and an Asian series housing series (JIS).
Eccentric snap ring width (B2): 13.5 mm.
Inner ring/inner race width (B): 34 mm.
Total bearing width including eccentric snap ring rings (B1): 43.5 mm.