Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR ES206-19G2T04 for cylindrical shafts with a wide inner ring protruding to one side. Single lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with 5/16-24UNF screw.

Rated dynamic load 19.5 kN, calculated static load 11.2 kN. Use temperature -40°C to 100°C
Suitable for use in low temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR ES206-19G2T04 housing bearing to be installed in both a European series (ISO) housing and an Asian series housing series (JIS).
Eccentric snap ring width (B2): 15.9 mm.
Inner ring/inner race width (B): 23.8 mm.
Overall bearing width including eccentric locking ring (B1): 35.7 mm.