Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR ES203-11G2T04 for cylindrical shafts with a wide inner ring protruding to one side. Single lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with 1/4-28UNF screw.

Rated dynamic load 9.55 kN, calculated static load 4.78 kN. Use temperature -40°C to 100°C
Suitable for use in low temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR ES203-11G2T04 housing bearing to be installed in both a European series (ISO) housing and an Asian series housing series (JIS).
Eccentric snap ring width (B2): 13.5 mm.
Inner ring/inner race width (B): 19.1 mm.
Overall bearing width including eccentric locking ring (B1): 28.6 mm.