Single row sealed insert ball bearing with a cylindrical surface of the outer (outer) ring SNR CEX208 for cylindrical shafts. With a wide inner ring protruding in both directions. With grooves for circlips on the outer race. Contact seal with additional protective plate (oil deflector) on both sides. Fastening to the shaft: eccentric locking ring with M8x1 screw.

Rated dynamic load 32.6 kN, calculated static load 19.9 kN. Use temperature -20°C to 100°C
Usually installed in a housing.
Eccentric snap ring width (B2): 18.3 mm.
Inner ring/inner race width (B): 42.8 mm.
Total bearing width including eccentric snap ring (B1 ): 56.3 mm.