|
Quantity
|
Out of stock
|
||
|
|
|||
Single row sealed insert ball bearing with a cylindrical surface of the outer (outer) ring SNR CES205 for cylindrical shafts. With a wide inner ring protruding to one side. With grooves for circlips on the outer race. Single lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with M6x1 screw.
Rated dynamic load 14 kN, calculated static load 7.88 kN. Use temperature -20°C to 100°C
Usually installed in a housing.
Eccentric snap ring width (B2): 13.5 mm.
Inner ring/inner race width (B): 21.5 mm.
Total bearing width including eccentric snap ring (B1 ): 31 mm.
Found under catalog numbers: 705063.0