Single row insert bearing YSP 207 SB-2DW/AG by SKF brand.

Cylindrical bore type for 1.378 in. / 35 mm. shaft diametr, outer ring surface is spherical, inner ring extended symmetrically on both sides with SKF ConCentra locking technology.
Made of hardened carbon chromium bearing steel, most widely used material for bearing rings and rolling elements.
Principal dimensions is 1.378х2.835х1.563 in. equal to 35х72х39.7 mm.
The inner ring is located on the shaft by means of ConCentra locking technology, suitable for constant and alternating directions of rotation and for high speeds. Provide low noise and vibration levels, and virtually eliminate fretting corrosion between the shaft and the bore of the ConCentra adapter.
Without coating.
Without relubrication feature, have no lubrication holes.
Capped by five-lip contact seal on both sides. Seals consist of a sheet steel insert with a vulcanized fivelip contact seal made of a low-friction NBR. Each seal lip has a different design, the outermost and innermost lips act as auxiliary lips and protect the three inner lips from dust and coarse contaminants, the three inner lips make constant contact with the inner ring shoulder. Greased with the appropriate amount of high quality grease under clean conditions. Recommended for extremely contaminated environments, such as agricultural applications.
Relubrication can extend bearing service life if the bearing have lubrication holes.
Polymer cage.
Metric series product.

Radial insert ball bearings are based on sealed deep groove ball bearings, this is ready-to-fit machine elements. They are highly suitable where predominantly radial loads must be supported. These bearings also give quieter running and lower vibration levels than standard radial insert ball bearings.

Picture for illustration purposes only, product may differ from image. See technical specification for details.