Cylindrical bore type for 0.787 in. / 20 mm. shaft diametr, outer ring surface is spherical, standard inner ring for a fit seat.
Made of hardened carbon chromium bearing steel, most widely used material for bearing rings and rolling elements.
Principal dimensions is 0.787х1.850х0.551 in. equal to 20х47х14 mm.
The inner ring with interference fit, suitable for bearing arrangements with an alternating direction of rotation and offer smooth running.
Without coating.
Without relubrication feature, have no lubrication holes.
Capped by contact seals on both sides, filled with the appropriate amount of high quality grease under clean conditions. Typically should not be washed or relubricated, lubricated for the life of the bearing.
Polymer cage.
Metric series product.

Radial insert ball bearings are based on sealed deep groove ball bearings, this is ready-to-fit machine elements. They are highly suitable where predominantly radial loads must be supported. These bearings also give quieter running and lower vibration levels than standard radial insert ball bearings.

Picture for illustration purposes only, product may differ from image. See technical specification for details.