Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX318G2L3 for cylindrical shafts with a wide inner ring protruding in both directions. Three-lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with M20x1.5 screw.

Rated dynamic load 143 kN, calculated static load 108 kN. Operating temperature from -20 °C to 100 °C
Typically installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX318G2L3 housing bearing to be installed as European Series (ISO) and Asian Series (JIS) housings.
Eccentric Retaining Ring Width (B2): 36.5 mm.
Inner Ring/Inner Race Width (B): 87 .3 mm.
Total bearing width including eccentric retaining ring (B1): 115.9 mm.