Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX214-43G2L3 for cylindrical shafts with a wide inner ring protruding in both directions. Three-lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with 3/8-24UNF screw.

Rated dynamic load 62 kN, calculated static load 45 kN. Operating temperature from -20 °C to 100 °C
Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the installation of a housing bearing SNR EX214- 43G2L3 in both European Series (ISO) and Asian Series (JIS) housings.
Eccentric Retaining Ring Width (B2): 23.5mm.
Inner Ring/Inner Race Width (B) : 68.2 mm.
Total bearing width including eccentric retaining ring (B1): 85.7 mm.