Single row sealed high temperature insert ball bearing with spherical outer ring surface SNR EX212-39G2T20 for cylindrical shafts with a wide inner ring extending to both sides. Labyrinth contact seal on both sides. Fastening to the shaft: eccentric locking ring with 3/8-24UNF screw.

Rated dynamic load 52.5 kN, calculated static load 32.8 kN. Use temperature -20°C to 200°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX212-39G2T20 housing bearing to be installed in both a European series (ISO) housing and an Asian series housing series (JIS).
Eccentric snap ring width (B2): 22.3 mm.
Inner ring/inner race width (B): 61.8 mm.
Overall bearing width including eccentric locking ring (B1): 77.7 mm.