Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR EX207G2L3 for cylindrical shafts with a wide inner ring protruding in both directions. Three-lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with M8x1 screw.

Rated dynamic load 25.7 kN, calculated static load 15.2 kN. Operating temperature from -20 °C to 100 °C
Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR EX207G2L3 housing bearing to be installed as into European Series (ISO) and Asian Series (JIS) housings.
Eccentric retaining ring width (B2): 17.5 mm.
Inner ring/inner race width (B): 37 .6 mm.
Total bearing width including eccentric retaining ring (B1): 51.1 mm.