Single row sealed insert ball bearing with a spherical surface of the outer (outer) ring SNR ES206-18G2 for cylindrical shafts with a wide inner ring protruding to one side. Single lip contact seal on both sides. Fastening to the shaft: eccentric locking ring with 5/16-24UNF screw.

Rated dynamic load 19.5 kN, calculated static load 11.2 kN. Use temperature from -20 °C to 100 °C
Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the installation of a housing bearing SNR ES206- 18G2 in both European Series (ISO) and Asian Series (JIS) housings.
Eccentric Retaining Ring Width (B2): 15.9mm.
Inner Ring/Inner Race Width (B) : 23.8 mm.
Total bearing width including eccentric retaining ring (B1): 35.7 mm.
Found under catalog numbers: JD9357