Single row sealed high temperature insert ball bearing with spherical outer ring surface SNR ES203G2T20 for cylindrical shafts with a wide inner ring protruding to one side. Labyrinth contact seal on both sides. Fastening to the shaft: eccentric locking ring with M6x1 screw.

Rated dynamic load 9.55 kN, calculated static load 4.78 kN. Use temperature -20°C to 200°C
Suitable for use in high temperature environments. Usually installed in a housing, it is able to compensate for shaft misalignments relative to the bearing housing due to the spherical design of the outer ring.
Two rows of lubrication holes allow the SNR ES203G2T20 housing bearing to be installed in both a European series housing (ISO) and an Asian series housing ( JIS).
Eccentric snap ring width (B2): 13.5 mm.
Inner ring/inner race width (B): 19.1 mm.
Total bearing width including eccentric snap ring rings (B1): 28.6 mm.