Cylindrical bore type for 1.575 in. / 40 mm. shaft diametr, outer ring surface is cylindrical with snap ring, split inner ring.
Made of hardened carbon chromium bearing steel, most widely used material for bearing rings and rolling elements.
Principal dimensions is 1.575х3.543х1.437 in. equal to 40х90х36.5 mm.
Open type bearing without sealing. Require little maintenance.
Contact angle is 40 °
Two-piont (normal) contact type.
Machined brass cage.
Metric series product.

Double row angular contact ball bearings with split inner ring suitable for radial and axial loads acting simultaneously, where the axial load and tilting moments acts in both direction.
The two-piece inner ring allow filling the bearing with a larger number of balls, with a larger contact angle, providing a high load carrying capacity, especially in the axial direction. In their design and operation correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement (O-arrangement), while requiring less axial space. They can operate at high speeds and, depending on the variant, even very high speeds. Require less axial space than equivalent pair of single row angular contact ball bearings, suitable where a stiff bearing arrangement is required.

Picture for illustration purposes only, product may differ from image. See technical specification for details.